We produce polymer-doped graphene additives for coatings and other matrices, as well as self-standing coating materials.
Polymer-aided exfoliation
Green Click Chemistry exfoliates graphite with a polymer.
A compatibilised additive
The nanoplates carry a polymeric compatibiliser, so they disperse in conventional epoxy coatings and make them thermally and electrically conductive.
Specification
IG101 Regular
- AppearanceVisualBlack powder
- Particle sizeParticle size analyserd(0.5) 40 µm
- Powder density0.32 g/ml
- CompositionTGA20 wt.% graphene structures in a polymer matrix
- HandlingSafety data sheetWater insoluble. Not classified as dangerous goods.
Values from IntiGraphene test data and the 2025 technical data sheet.
Documents
Request the technical data sheetOn request
Request the safety data sheetOn request
Tested to ISO 9227.
860 h
With IG101
360 h
Conventional epoxy
+139%
Corrosion resistance, ISO 9227
- Corrosion resistance improvement over the unenhanced coating+139%
- Conventional epoxy, hours in salt spray360 h
- IG101-enhanced coating, hours in salt spray860 h
Salt spray testing to ISO 9227 is the standard method for corrosion performance.
What IG101 changes in a coating.
01
Anti-corrosion
The nanoplates lengthen the diffusion path for water, oxygen and chloride ions and improve adhesion at the substrate. The barrier gets tighter without a thicker film.
02
EMI shielding
A percolating graphene network makes the film electrically conductive. Electromagnetic interference is attenuated in the coating itself.
03
Thermal conductivity
Two more properties come from the same film, not separate functions. The same network also carries heat, so a resin that would insulate now conducts and heat leaves through the coating.
04
Self-healing
Under electrical stimulus, the film also repairs scratches and micro-damage, recorded under a microscope.
Before
Healing
After
Self-healing
From a 43-second lab recording, IntiGraphene. A scratch in an IG101 film before, during and after closing under electrical stimulus. The middle clip loops the moment it heals.
Your formulation. Our additive. Data back.
Test menu
- Anti-corrosionSalt spray, and pull-off adhesionISO 9227, ISO 4624
- EMI shieldingShielding effectivenessASTM D4935
- Thermal conductivityThermal diffusivityASTM E1461
- Self-healingScratch recovery under electrical stimulus, recorded under microscopeMicroscope recovery test
A named test for each property.